(187 products available)
Ready to Ship
Ready to Ship
Car battery 12v50ah are an essential part of any automotive electrical system. The following is an outline of the different types of 12v 50ah car batteries:
Lead-Acid Batteries:
These are the most common types of batteries used in cars. They are made using six cells that create a 12-volt charge. Each cell has lead plates that are submerged in sulfuric acid and water. These batteries are very affordable and have high cranking power. They also have low energy density and are very heavy. They also require maintenance and are not deep discharged.
Lithium-Ion Batteries:
These batteries have a higher upfront cost but are very lightweight with high energy density. They also have a high discharge and are low in self-discharge. They also have a long life cycle compared to lead-acid batteries. Lithium-ion batteries also have a high voltage and are fast charging. However, they have a dangerous risk of fire, especially when overcharged, and require management. They are also affected by low temperatures and have a high-cost density.
Absorbent Glass Mat (AGM) Batteries:
These are lead-acid batteries that use fiberglass mats to soak up the electrolytes. They are maintenance-free and can be mounted in different positions. AGM batteries also have a high cranking power and are very durable. They also have a deep discharge and can be cycled frequently. The batteries are also resistant to vibrations and have a low self-discharge rate. However, they are expensive and sensitive to overcharging. They also have a limited capacity for high temperatures and require a specific charging profile.
Gel Batteries:
These are also lead-acid batteries, but the electrolytes are in a gel state. This is achieved by adding silica to the sulfuric acid and water mix. The gel creates a thickened substance that acts as a separator between the positive and negative plates. Gel batteries are maintenance free, have low self-discharge, and are also very safe with low toxicity. They are also resistant to deep discharge and have a long cycle life. However, they have a low power density and are slow to recharge. They also have a high-cost density and are sensitive to overcharging.
Lithium Iron Phosphate (LiFePO4) Batteries:
These are lithium-ion batteries with lithium manganese oxide as the cathode material. They are more stable and have a higher thermal stability. They are also very safe with high energy density and are affordable. LiFePO4 batteries also have a long cycle life and are fast charging. However, they have a low voltage and density compared to other lithium-ion batteries, and they also have a high self-discharge and are affected by high temperatures.
Below are some specifications that will be covered for the 12v 50ah battery:
Dimensions
Length: 12V 50Ah batteries are usually about 12.0 inches long, but some may be longer.
Width: The width is about 6.8 inches. This is about an inch wider than the average car.
Height: The height is about 8.7 inches. This is about an inch taller than the average car.
Weight
12V 50Ah batteries are usually about 50 pounds (23 kg). This is about the same as a large dog.
Terminal configuration
Positive terminal: The positive terminal is usually located on the right side of the battery and is labeled with a ""+"" sign. The positive terminal connects to the positive side of the electrical system, providing power to the system.
Negative terminal: The negative terminal is usually located on the left side of the battery and is labeled with a ""-"" sign. The negative terminal connects to the negative side of the electrical system, providing a return path for the current.
Post type: The terminals are usually of the SAE type, which features flat posts that bolt onto the battery.
Terminal torque specifications
Positive terminal: The positive terminal is torqued to 95 inch-pounds (10.7 Nm).
Negative terminal: The negative terminal is torqued to 80 inch-pounds (9.0 Nm).
Discharge depth
Maximum discharge depth: 12V 50Ah batteries can be discharged up to 80% of their total capacity, which means 40Ah can be used.
Recommended discharge depth: It is recommended to discharge 12V 50Ah batteries up to 50% of their total capacity, which means 25Ah should be used.
12V 50Ah car batteries should be maintained every three months. This will ensure that the battery lasts for a long period.
Terminal cleaning
Gather the necessary supplies: Users will need a battery terminal cleaner, a wire brush, and a baking soda and water solution. These supplies can be found at most auto parts stores or online.
Disconnect the cables: To clean the terminals, the negative cable should be disconnected first, followed by the positive cable. This helps prevent short circuits or shocks. The cables should be untangled from the terminals.
Scrub the terminals: The terminals should be scrubbed with a wire brush and a baking soda solution to remove any corrosion or buildup. This helps ensure a good connection and prevents future corrosion.
Clean the surrounding area: The area around the terminals should be cleaned with a damp cloth or paper towel to remove any dirt or debris. This helps keep the battery and surrounding area clean.
Reconnect the cables: Once everything is clean, the positive cable should be reconnected first, followed by the negative cable. This helps maintain proper battery function and safety.
Watering
Check the water level: The water level should be checked in each cell of the battery to ensure it is at the recommended level. This helps ensure proper function and longevity of the battery.
Prepare the water: Distilled water should be used to refill the cells. Tap water should not be used, as it can contain minerals that can damage the battery.
Refill the cells: The recommended amount of water should be added to each cell until it reaches the designated level. This helps ensure proper function and prevents damage to the battery.
Seal the battery: Once all cells have been refilled, the battery should be sealed according to the manufacturer's instructions. This helps prevent leaks and maintains the integrity of the battery.
Choosing the right 12v 50ah car battery is crucial for retailers, and here are some tips to help select suitable options for stock.
Consider the Cold Cranking Amps (CCA)
When selecting a suitable car battery, consider the Cold Cranking Amps (CCA). CCA represents the battery's ability to start the car in cold weather. The higher the CCrankingamps, the better the battery will perform in cold weather. If the target customers live in a cold area, stock batteries with high CCA ratings.
Look at the Cranking Amps (CA)
Consider the Cranking Amps (CA) when selecting a suitable car battery. CA represents the battery's ability to start the car in warm weather. The higher the Cranking Amps, the better the battery will perform in warm weather. If the target customers live in a warm area, stock batteries with high CA ratings.
Check the Reserve Capacity (RC)
Reserve Capacity (RC) is the most crucial aspect to consider when choosing a suitable car battery. Reserve capacity is the battery's ability to power the essential car components when the battery is drained. The higher the RC, the longer the battery will last when it is drained. Customers who use their batteries for many accessories should stock batteries with higher RC ratings.
Consider the Amp-Hour (Ah) Rating
When selecting a suitable 12v 50ah battery, consider the Amp-Hour (Ah) rating. The Amp-Hour (Ah) rating represents the battery's ability to power the essential components of a car. The higher the Amp-Hour rating, the more power the battery will provide. Customers who use many accessories should stock batteries with higher Amp-Hour ratings.
When replacing a 12v 50ah battery, it's important to follow the correct procedures to ensure safety and proper function. Here is a step-by-step guide on how to replace a car battery:
Safety precautions:
Turn off the vehicle's ignition and ensure all electrical components are off. Wear appropriate safety gear such as gloves and safety glasses. Have proper ventilation in place to prevent the buildup of hazardous gases.
Gather necessary tools:
Gather tools such as wrenches, pliers, a battery terminal cleaner, and a battery carrier or strap. Have safety equipment such as gloves and goggles within reach.
New battery preparation:
Ensure the new battery is the correct type and size for the vehicle. Clean the battery terminals and ensure they are free of corrosion. Check that the battery's state of charge is sufficient before installation.
Disconnecting the old battery:
Start by loosening the nut on the negative terminal (usually black) and removing the cable from the terminal. Then, do the same for the positive terminal (usually red). Always disconnect the negative terminal first to reduce the risk of sparks and short circuits. Ensure the disconnected cables are safely away from the battery and do not touch each other or the battery terminals.
Removing the old battery:
Remove any clamps, brackets, or fasteners securing the battery in place. Carefully lift the battery out of its tray using the designated lifting points or a battery carrier. Be aware that batteries can be heavy and contain hazardous materials. Lift with care and follow proper handling procedures.
Installing the new battery:
Place the new battery in the battery tray in the same position as the old one. Ensure it is secure and properly aligned. Reinstall any clamps, brackets, or fasteners to hold the battery in place. Tighten fasteners to the manufacturer's specifications.
Connecting the new battery:
Connect the battery cables to the terminals of the new battery. Start with the positive terminal (red) and then move to the negative terminal (black). Ensure the connections are clean, tight, and secure to prevent corrosion and ensure good conductivity.
Final checks:
Check that all tools, clamps, and covers are reinstalled and that the battery cables are properly routed and secured. Start the vehicle and check for any unusual noises or warning lights. Ensure all electrical systems work correctly.
Q1: Can a 12v50Ah battery be used for solar energy storage?
A1: Yes, a 12v50Ah battery can be used for solar energy storage. However, its small size and capacity may not provide sufficient energy for larger applications or extended use.
Q2: What does a 12v50Ah battery power?
A2: A 12v50Ah battery can power devices with a total power consumption of up to 600Wh for one day (24 hours) with continuous use. Examples include small medical devices, GPS tracking devices, and low-power networking equipment.
Q3: Is the 12v50Ah battery suitable for emergency backup power?
A3: Yes, the 12v50Ah battery can provide emergency backup power for critical devices such as communication equipment, medical devices, and monitoring systems. However, it may not be sufficient for larger devices or extended outages.
Q4: How long will a 12v50Ah battery last during an outage?
A4: The duration of a 12v50Ah battery during an outage depends on the total power consumption of the connected devices. For example, if the devices consume 50 watts, the battery can last for approximately 12 hours (50 watts x 12 hours = 600Wh).
浙公网安备 33010002000092号
浙B2-20120091-4