(168 products available)
The car battery N70 mf is a popular choice for many vehicles due to its reliability and performance. However, it is not a battery type; instead, it is a code that represents the size and specifications of the battery. There are different types of batteries that fall under the N70 MF category:
The N70 car battery is among the most used batteries in the automotive industry. It is a lead-acid battery that uses a traditional flooded battery technology. The N70 batteries come in various sizes and are classified based on their amp-hour ratings. These batteries do not need regular maintenance. Some of the specifications of the N70 batteries include:
Battery Size:
The N70 batteries are rectangular-shaped batteries with dimensions of 260mm in width, 175mm in length, and 220mm in height.
Capacity:
The N70 batteries have a capacity that ranges from 70Ah to 90Ah. This means they can provide a consistent current of 70 to 90 amps for up to 20 hours before the charge drops to 10.5 volts.
Cold Cranking Amps (CCA):
The CCA rating of the N70 batteries ranges from 600A to 700A. This means the batteries can provide a current of 600 to 700 amps for up to 30 seconds at 0 degrees Celsius before the voltage drops to 7.2 volts.
Voltage:
Like most N70 batteries, the N70MF batteries have a nominal voltage of 12 volts. This voltage is obtained from the 6 cells connected in series.
Terminal Configuration:
The N70MF batteries have terminals located on the top and are configured in various ways based on the battery model.
Dimensions:
The N70MF batteries have standard dimensions of 260mm in width, 175mm in length, and 220mm in height. This makes it easy to install the batteries.
To ensure the longevity and reliability of the N70MF batteries, regular maintenance is required. Here are some of the maintenance tips for the N70MF batteries:
Choosing the right N70 battery for a car is a critical decision that can affect vehicle performance and reliability. Here are some key factors to consider before buying an N70 MF battery:
Capacity and Power:
The N70 MF battery has a capacity of 70Ah, making it suitable for cars with standard electrical needs. However, for electric vehicles with higher power requirements (e.g., hybrid and electric vehicles), the battery capacity should be higher. This ensures the battery can supply the required power without damage.
Cold Cranking Amperes (CCA):
Cranking current is the maximum current the battery can provide for 30 seconds at 0°C without dropping below 7V. This feature is important for starting the engine, especially in cold weather. When choosing a car battery, consider the CCA rating. Ensure it meets or exceeds the vehicle manufacturer's recommendations.
Physical Size:
The N70 MF battery has dimensions of 353 × 175 × 190 mm. Ensure that the battery can be installed in the available space in the car. Also, check that the battery can be mounted firmly to prevent movement while driving.
Terminal Configuration:
The position and type of battery terminals (posts) should match the vehicle's requirements. The positive terminal (red) and the negative terminal (black) must be connected in the correct direction, according to the car's electrical system.
Warranty and Reliability:
Choose a battery with a long warranty period (minimum 1 year) and reliable quality. The warranty reflects the manufacturer's confidence in the product. At the same time, reliability ensures that the battery operates stably and has a long service life.
Brand Reputation:
Consider the reputation of the battery manufacturer. Choose well-known brands with good reviews and customer satisfaction. Manufacturers are usually responsible for providing high-quality products and good customer service.
Price:
Car batteries are available in various price ranges. Don't choose the cheapest battery, as it may be of poor quality or short-lived. Choose batteries with good quality, reliable performance, and optimal price to meet the needs of the vehicle.
Car batteries are important components of a car. They are the primary source of power for the car. Without a strong battery, the car won't start. Because of its importance, having a strong N70 MF battery is not enough. It is equally important to know how to install it. This section will discuss how to install the N70 MF battery successfully.
Before we go into the steps, here are some materials needed to install the N70 MF battery.
Once the materials are in place, follow the steps below to install the N70 MF battery successfully.
1. Prepare the Vehicle
To prepare the vehicle, open the car hood and use the car hood prop to hold it open. This is to enable easy access to the battery.
2. Safety Precautions
To observe safety precautions, put on the safety glasses and gloves before starting the installation. The gloves protect the hands from any injury during the process, while the glasses protect the eyes from battery acid or debris.
3. Disconnect the old battery cables
To disconnect the old battery cables, get a wrench or socket and use it to loosen the negative terminal (usually black) first. After it is loosened, remove the cable from the terminal. Do the same for the positive terminal (usually red) with the larger gauge wire. Make sure to disconnect the cables in the right order to avoid any short circuit or spark.
4. Remove the old battery from the car
To remove the old battery from the car, loosen and remove any clamps or brackets holding the battery in place with a wrench or socket. After that, carefully lift the battery out of the car. Note: Car batteries are heavy, so it is advisable to lift them with two hands.
5. Clean the terminals
To clean the terminals, use a battery terminal cleaner or brush to clean any corrosion or debris from the battery terminals. Ensure the terminals are clean before installing the new battery.
6. Install the new battery
To install the new battery, carefully place the N70 MF battery into the battery tray and secure it with clamps or brackets. Make sure the terminals are in the same position as the old battery.
7. Reconnect the battery cables
To reconnect the battery cables, apply a thin layer of corrosion prevention grease to the battery terminals. Then, reconnect the positive cable to the positive terminal and the negative cable to the negative terminal. Use a wrench or socket to tighten the clamps.
8. Final checks
To do final checks, double-check that the battery is securely fastened and the terminals are tightly connected. Remove the car hood prop and close the hood.
Q1: What does an N70 battery mean?
A1: N70 refers to the size and specifications of the battery. N70 batteries have larger dimensions and are suitable for big vehicles. Manufacturers use standardized codes to eliminate confusion when selecting batteries for replacement.
Q2: What does MF mean in a car battery?
A2: MF stands for maintenance-free. Maintenance-free batteries do not require regular maintenance, such as adding water to the electrolyte. These batteries are designed to be fully charged and discharged without user intervention.
Q3: What is the difference between an N70 battery and an N60 battery?
A3: The main difference between the N70 and N60 batteries is size and capacity. The N60 battery has a smaller dimension (L: 260 mm, W: 175 mm, H: 225 mm) and a lower capacity (60Ah) compared to the N70 battery. The N60 battery is suitable for small vehicles, while the N70 battery is designed for big vehicles such as trucks and SUVs.
Q4: Can users convert an N70 battery to an N70Z battery?
A4: Yes. An N70 battery can be converted to an N70Z battery. The N70Z battery is similar to the N70 battery but with the addition of a terminal layout or other specification modifications. The N70Z battery is compatible with the N70 battery.
Q5: Can users install the N70 MF car battery themselves?
A5: Yes, users can install the N70 MF car battery themselves. The process is simple and straightforward. Users need to remove the old battery, clean the battery tray, place the new battery, and connect the terminals (positive to positive and negative to negative).
浙公网安备 33010002000092号
浙B2-20120091-4