(16 products available)
Ready to Ship
A dry battery is a widely used battery that is not able to spill and has a limited capacity. The DIN80 dry car battery is designed according to the European standards of the battery size and terminal layout. The DIN80 dry car battery types are as follows.
Flooded Lead-Acid Batteries:
This is the most common type of lead-acid battery. It is affordable and has a high power capacity. However, they need maintenance, such as watering and cleaning. They also generate hydrogen gas, which requires proper ventilation to avoid explosions.
Sealed Lead-Acid Batteries:
These are maintenance-free batteries. They are further divided into Absorbed Glass Mat (AGM) and Gel Batteries. AGM batteries have glass mats that absorb the electrolyte and can deliver high currents. Gel batteries have a gelified electrolyte and are less affected by deep discharges.
Lithium-Ion Batteries:
These batteries are lightweight and have high energy storage, making them ideal for high-performance vehicles. They have a higher upfront cost, and their performance can be affected by extreme heat.
Enhanced Flooded Batteries (EFBs):
EFBs are improvements on traditional flooded lead-acid batteries. They are designed for stop-start systems and have higher cycling stability. They are more affordable than lithium batteries but heavier than EFBs.
The specifications of a DIN 80 battery are as follows:
Voltage
The voltage of a DIN 80 battery is 12. This means it has 12 volts. The voltage is the same for all dry batteries. It supplies power for all electrical systems in a vehicle, including lights, radios, and GPS.
Capacity
The capacity of the DIN 80 battery is 80 Ah (ampere-hours). This means the battery can supply 80 amps of current for 1 hour before it discharges. Alternatively, it can supply 40 amps for 2 hours or 20 amps for 4 hours. The capacity determines how long the battery can power electrical devices.
Cold Cranking Amps (CCA)
The CCA rating of a DIN 80 battery is 680-800 CCA. This means it can deliver 680 to 800 amps of current for 30 seconds at 0°F (-18°C) without dropping below 7.2 volts. The CCA is crucial for starting engines, especially in cold weather.
Reserve Capacity (RC)
The reserve capacity of a DIN 80 battery is 120-150 minutes. This means it can power electrical devices for 120 to 150 minutes after total discharge. The RC is vital during emergencies when the engine cannot start but needs power to run essential devices.
Dimensions
The dimensions of a DIN 80 battery are standard across all types. It has a length of 315 mm, a width of 175 mm, and a height of 220 mm. The dimensions determine if a battery can fit into a vehicle's engine compartment.
Weight
The weight of a DIN 80 battery is 22-25 kg. Heavier batteries have more lead plates, which provide more power. However, they are also more challenging to lift and install. The weight affects the battery's portability.
Maintaining a DIN 80 dry battery is crucial for achieving longevity and optimal performance. Here are some key maintenance tips:
Regular inspection
It is essential to inspect the battery regularly to ensure it is in good shape. Check for signs of wear, damage, or leakage. Also, ensure the battery terminals are clean and tight to prevent loose connections.
Proper cleaning
Dirt and corrosion can accumulate on the battery terminals over time, affecting its performance. Clean the terminals using a wire brush and a mixture of baking soda and water. This helps remove any corrosion that may have formed.
Secure installation
It is essential to ensure that the DIN 80 battery is properly installed and secured in the vehicle. Loose batteries can vibrate and cause internal damage, leading to reduced performance and lifespan.
Avoid deep discharges
Deep discharges can significantly reduce the lifespan of a DIN 80 battery. To avoid this, ensure that the battery is charged adequately after use.
Temperature control
Extreme temperatures can affect the performance and lifespan of a DIN 80 battery. Ensure that the battery is installed in a location with a stable temperature to avoid damage from extreme heat or cold.
Regular charging
If the vehicle is not used for an extended period, it is essential to charge the battery regularly. This helps maintain its performance and prevents deep discharges.
Avoid overloading
Overloading the battery with too many electrical devices can strain it and reduce its lifespan. Ensure that the electrical load on the battery is within its specified limits to avoid damage.
Before investing in a DIN 80 battery, business owners should consider several factors to ensure their needs are met. Here are some of them:
Capacity and power requirements
Firstly, commercial battery buyers should choose a battery with sufficient power and capacity to fit their needs. Larger vehicles, such as trucks, need batteries with a higher capacity to power their engines. On the other hand, your energy requirements for smaller vehicles will be lower.
Quality and reliability
To choose a reliable and high-quality DIN 80 battery, it is important to consider the manufacturer's reputation. Therefore, buyers should purchase batteries from well-known brands that offer warranties and guarantees of their products. Batteries from reputable manufacturers are reliable and of high quality.
Price
Business owners should set aside a budget for purchasing DIN 80 dry batteries. However, they should not be swayed by the low price alone; they should consider the long-term value. Sometimes, batteries with higher initial costs are more economical because they are more efficient and durable.
Size and weight
Buyers should choose the right-sized DIN 80 battery that fits their vehicle's battery compartment. In addition, they should consider the battery's weight, especially if they drive a performance or sports car, as it may affect the vehicle's performance.
Environmental considerations
Buyers should consider the battery's environmental impact. For instance, some batteries are manufactured using recyclable materials. In addition, they should choose batteries with a low level of toxic materials.
Maintenance requirements
Buyers should choose DIN 80 batteries that are easy to maintain and require minimal maintenance. Sealed maintenance-free batteries are much easier to maintain and save time and money.
Safety features
Buyers should choose batteries with high safety standards and features. For instance, the batteries should have protection against short circuits, overcharging, and overheating. In addition, they should have safety certifications.
Starting power
Buyers should consider the CCA (Cold Cranking Amperage) ratings when choosing a dry cell car battery. The CCA ratings indicate the maximum current the battery can deliver for 30 seconds at 0°F while maintaining 7V. The higher the CCA ratings, the more powerful the battery is, and the more it can support starting a large truck. Therefore, buyers should choose a battery with higher CCA ratings if they want to use it to start a large truck.
Replacing a DIN 80 battery is a straightforward process that can be done at home with some basic tools. Here is a step-by-step guide for replacing a DIN 80 battery:
Tools needed:
Replacement steps:
Q1: What does DIN 80 mean on a battery?
A1: DIN 80 is a standard used in Europe to define battery size and terminal layout. The number 80 refers to the ampere-hour rating of the battery, which is 80 Ah. An 80 Ah battery can theoretically provide 80 amps of current for one hour or 40 amps for two hours before dropping below the minimum voltage level.
Q2: Is DIN 80 battery good?
A2: A DIN 80 battery is suitable for small cars with petrol engines and light electrical loads. It suits vehicles that do not require a large battery to start the engine or power additional equipment. Larger batteries are needed for bigger cars, diesel engines, or vehicles with many electrical accessories.
Q3: How long does a DIN 80 battery last?
A3: The lifespan of a DIN 80 dry car battery depends on how people use it, how well they maintain it, and the temperature conditions. Typically, it lasts 3 to 5 years. Signs of an aging battery include slow cranking or warning lights. Replacing it before problems occur is best to avoid being stranded.
Q4: Is A DIN 80 compatible with all vehicles?
A4: No, a DIN 80 dry car battery is not compatible with all vehicles. Before installing a new battery, check the owner's manual to ensure it matches the required size, terminal layout, and specifications for the car.
浙公网安备 33010002000092号
浙B2-20120091-4