(2046 products available)
Ready to Ship
Ready to Ship
The GS300 kit is a type of car kit that is used in vehicles to improve performance and appearance. It comes in different types, which include:
Turbo GS300 Kit:
The Turbo GS300 Kit is a performance kit that is used to increase the power and performance of the Lexus GS300 models. The Turbo GS300 Kit works by forcing more air into the engine, which allows more fuel to be burned and results in more power output. The Turbo GS300 Kit consists of a turbocharger, intercooler, exhaust manifold, wastegate, blow-off valve, intake piping, and oil feed/drain lines. The Turbo GS300 Kit can increase the horsepower of the Lexus GS300 models by 50 to 150 or even more, depending on the size of the turbocharger and other supporting modifications that are made.
V8 Swap GS300 Kit:
The V8 Swap GS300 Kit is a conversion kit that is used to convert the inline six-cylinder engine of the Lexus GS300 models into a V8 engine. The V8 Swap GS300 Kit consists of an engine mount, transmission mount, exhaust headers, intake adapter, cooling system components, wiring harness, and ECU. The V8 Swap GS300 Kit allows the Lexus GS300 models to be powered by a V8 engine, which provides more power and smoothness when driving.
Coilover GS300 Kit:
The Coilover GS300 Kit is a suspension kit that is used to improve the handling and adjust the ride height of the Lexus GS300 models. The Coilover GS300 Kit consists of coilover shocks, adjustable spring perches, and damping adjustment. The Coilover GS300 Kit allows the ride height of the Lexus GS300 models to be lowered by up to 2 inches or more, which helps to improve the handling and the appearance of the vehicle.
The following are the specifications of a typical Gs300 kit;
Device and Kit Contents
The gs300 kit contains a gs300 device and its charger, a quick start guide, and a gs300 user manual.
Device specifications
The gs300 device is powered by a lithium battery of 2000mAh. It has a battery life of up to 20 hours and a charging time of 2.5 hours. The gs300 device supports the following networks: 2G GSM, 3G UMTS, 4G LTE FDD, and 4G LTE TDD. The gs300 device connects through Bluetooth 4.2 and Wi-Fi 802.11a/b/g/n dual band. It has a data capacity of 256GB and a memory of 4GB RAM. The gs300 device has dimensions of 155*74*15mm and weighs 220g.
GS300 kit maintenance
To keep the Gs300 kit in good condition, always clean it. Use soft cloths, mild soap, and water to clean the device. Do not use cleaners with strong chemicals, such as cleaners with abrasive elements. Always keep the gs300 device dry and away from moisture to prevent it from getting damaged. Update the gs300 kit's device software periodically to improve functionality and performance. Follow the manufacturer's guide on maintaining the gs300 kit.
Before buying a proper GS300 kit, it is essential to know the factors that affect its quality. Here are some of them:
Type of Kit
The GS300 is a popular model for the Lexus IS series. Therefore, it is essential to know whether the car models are mentioned before or after the kits. Also, know whether the kit is a timing belt replacement, timing chain replacement, or a performance upgrade kit. All the kits have different qualities and may be suitable for different cars.
Brand Reputation
It's important to consider the brand reputation of the GS300 kit. Brands that have been in the market for a long time have a good reputation and provide quality kits. Therefore, do some research and look for reviews from previous customers.
Material Quality
The material quality of the components in the GS300 kit should be considered. The gs300 coilovers kit is a gs300 turbo kit; it's all about the coils, suspension, and, more importantly, the engine. Therefore, the quality of the components made from steel, aluminum, and other metals should be of good quality to ensure durability.
Compatibility
Before purchasing a GS300 kit, ensure that the components in the kit are compatible with the targeted vehicle. This is because not all GS300 kits are designed to be used in every vehicle. Therefore, if the components in the kit are incompatible with the vehicle, they will get damaged easily, and the vehicle won't perform well.
Warranty
Most suppliers and manufacturers offer a warranty to their customers. This is because the warranty acts as a good quality sign. In case the product has an issue, the buyer can return or exchange it.
Price
Price is also a factor that affects the quality of the GS300 kit. High-end kits are expensive because they are manufactured with quality material and components. On the other hand, affordable kits are made of low-quality material.
Some DIY gs300 coil packs instructions include the following:
Safety precautions
Before working on the ignition system, be sure to take the necessary safety measures. Turn off the engine and put on safety gear, such as gloves and goggles. To prevent electrical shocks or short circuits, carefully handle the ignition coils and their connections.
Gather necessary tools
Prepare a set of essential tools for the task at hand. These include screwdrivers, pliers, an 8mm deep socket, a 10mm socket, a ratchet, an extension, and a coil-on-plug (COP) ignition system removal tool. Having the necessary tools on hand will facilitate a smooth and effective ignition coil replacement procedure.
Remove engine cover
To access the ignition coils, the engine cover must be removed. Loosen the screws or bolts holding the cover in place using the proper tools, then carefully lift the cover off. Be cautious not to damage any underlying components or fragile clips while removing the engine cover.
Locate ignition coils
After removing the engine cover, the ignition coils will be visible on top of the engine. Depending on the GS model, the number and location of the coils might change. Typically, they are cylindrical-shaped components placed in a row or a staggered pattern, connected to the spark plugs by high-voltage cables.
Disconnect electrical connectors
To disconnect the ignition coils, carefully remove the electrical connectors. To release the locking mechanism, use the appropriate tool, such as a screwdriver or pliers, and pull the connector's plug. While doing this, take care not to break the connectors or damage the surrounding wiring harness.
Remove mounting bolts
Use the correct tools to remove the mounting bolts that hold the ignition coils in place. Depending on the GS model, some coils may be held down by screws or nuts. Carefully remove these fasteners and keep them in a safe place so they can be reused during reinstallation.
Remove and replace ignition coils
Once the mounting bolts are removed, gently pull the ignition coils out of their sockets. Be careful not to damage the surrounding components or tear any rubber seals while doing this. Take a moment to compare the old coils to the new ones before installing the replacement coils. Make sure the new coils match the old ones in terms of size, shape, and electrical connection layout.
Reinstalling ignition coils
Reinstall the new ignition coils in their proper locations after installing them. To ensure a tight and secure fit, press them firmly into their sockets and tighten the mounting bolts to the necessary torque specifications. Reconnect the electrical connectors to the corresponding terminals on each coil, making sure they are securely attached and properly aligned.
Reconnect electrical connectors
To disconnect the ignition coils, carefully remove the electrical connectors. To release the locking mechanism, use the appropriate tool, such as a screwdriver or pliers, and pull the connector's plug. While doing this, take care not to break the connectors or damage the surrounding wiring harness.
Reattach engine cover
Once the ignition coils are replaced, reattach the engine cover. Carefully position the cover over the engine and align it with the mounting points. Secure the cover with the previously removed screws or bolts, ensuring a tight seal. Double-check that all electrical connections and other components are correctly positioned before reattaching the engine cover.
Final checks and tests
After replacing the ignition coils and reattaching the engine cover, perform final checks and tests. Make sure all tools and loose parts are removed from the engine compartment. Turn on the ignition and start the engine to verify that it runs smoothly and without problems. If any issues persist, double-check the installation, electrical connections, and other related components.
Q1: Do I need to tune my car after installing the GS300 kit?
A1: Tuning is not mandatory after installing the GS300 kit. Nevertheless, tuning improves performance and ensures the engine runs optimally with the new parts.
Q2: Can I install the GS300 kit on a car with a manual transmission?
A2: Yes, the GS300 kit is compatible with vehicles that have manual transmission setups. The components of the kit are designed to work with both manual and automatic transmission systems.
Q3: How long does it take to install the GS300 kit?
A3: The time taken to install the GS300 kit depends on the GS300 kit being used and the vehicle's compatibility. On average, the installation can take anywhere from 4 to 8 hours. Using professional mechanics to install the kit reduces the install time.
浙公网安备 33010002000092号
浙B2-20120091-4