(193 products available)
Ready to Ship
Ready to Ship
Ready to Ship
Ready to Ship
The oil filter for Hyundai Atos are small but mighty components of the car that help keep the engine healthy. They come in different types, each with its own special job of cleaning the oil that goes into the engine. Here's a look at the different kinds of oil filters available:
Spin-On Oil Filters
These are the most commonly used oil filters. They are called ""spin-on"" because they can be easily screwed onto the engine like spinning a cap. Inside, they have special materials that trap dirt and tiny particles to stop them from getting into the engine. When it's time for a new filter, replacing it is a quick and mess-free job. Mechanics like their simple design and ability to efficiently clean the oil.
Suction Oil Filters
Instead of being attached to the engine block, suction filters are placed inside the oil pan. They clean the oil as it gets pumped up from the pan into the engine. This ensures only clean oil flows to the important moving parts. It is less common in most cars but provides extra protection for the engine.
Magnetic Oil Filters
These filters have a special magnet inside that attracts metal bits that may come loose from moving parts in the engine. Metal particles could cause damage if they enter the oil supply. So, the magnetic filter catches these metal fragments, preventing them from reaching critical components. The magnet saves the day by providing an extra layer of defense against wear and tear.
High-Performance Oil Filters
Some cars have upgraded filters made for tough driving conditions. For example, when driving at high speeds or carrying heavy loads, the oil filter works extra hard to keep the oil clean. High-performance filters have more filtration strength to handle the demands and challenges of high-performance driving. They ensure the engine runs smoothly, even under pressure.
Cartridge Oil Filters
Instead of a metal housing, these filters come in a plastic or paper container. The rest of the filter works the same way - filtering out dirt from the oil. It's just a different wrapping. Hyundai Atos oil filters use cartridge filters. They are eco-friendly because the materials can be recycled when disposed of after use. Changing to cartridge filters is a sustainable choice.
Bypass Oil Filters
These filters are connected to the bypass channel of the oil system. They catch larger debris but allow the oil to flow through easily without interruption. This design prevents clogging, ensuring the engine gets adequately lubricated. Bypass oil filters strike a balance between filtration efficiency and maintaining proper oil flow.
Filter Media
Oil filters for Hyundai Atos use different materials to capture contaminants. These include:
- Fiberglass: It is a durable and strong material that captures small particles.
- Filter Paper: It is affordable for mass production, but it is not long-lasting.
- Cotton: It is reusable and offers good filtration but requires regular cleaning.
- Steel Mesh: It is a strong material but offers less filtration compared to others.
The choice of media balances cost, durability, and filtration efficiency for each oil filter.
Capacity
The capacity of oil filters for Hyundai Atos indicates how much they can hold before clogging. It is measured in grams and shows how many contaminants the filter can capture. A higher capacity means the filter can last longer while capturing more dirt before needing a change. The typical range is:
- Low Capacity: 5-10g, suitable for short intervals.
- Medium Capacity: 15-20g, standard for regular changes.
- High Capacity: 30g or more, for high mileage or synthetic oils.
This allows the driver to choose a filter that matches their driving conditions and oil type.
Micron Rating
The micron rating of oil filters for Hyundai Atos indicates the smallest particles they can capture. It is measured in microns, with lower numbers meaning better filtration. A filter with a rating of 20 microns can trap particles as small as 20 millionths of a meter. This protects the engine from wear and tear caused by tiny dirt particles. Common ratings include:
- 10 Microns: Captures fine dust and dirt.
- 20 Microns: Standard for regular protection.
- 30 Microns: Good for large particles, less effective against small ones.
The chosen micron rating should balance filtration efficiency with oil flow performance.
Frequency of Change
The frequency of changing the oil filter on a Hyundai Atos is crucial for maintaining the engine's health. It is recommended to change the oil filter with every engine oil change. This is typically every 5,000 to 10,000 kilometers, depending on driving conditions.
Using low-quality engine oil or driving in harsh conditions like extreme temperatures, heavy traffic, or dusty roads requires more frequent changes. In such cases, change the oil filter every 2,500 kilometers or 1,500 miles. This ensures maximum protection against contaminants and maintains engine performance and longevity.
Choosing the right oil filter for a Hyundai Atos involves considering several factors to ensure compatibility, performance, and longevity of the vehicle's engine. Here are some key factors to keep in mind:
Most hyundai oil filters come with a new valve. The one-way valve prevents clean oil from flowing back into the sludge. It is a good idea to replace the sludge every 50,000 miles. However, the Atos does not have a sludge. So, there is no need to replace anything other than the oil filter the recommended number of times.
Changing the oil filter is a pretty straightforward task. Anyone with basic mechanical skills should have no trouble doing it. First, get the necessary tools: a new oil filter, oil, a wrench, an oil catch pan, funnel, and jack. Start by lifting the car with the jack. Ensure that the jack is placed on a solid and level ground.
Locate the oil filter. It is usually under the car, close to the engine. Use the wrench to loosen the filter. Be careful because some oil will start draining out as soon as the filter is loose. Place the oil catch pan under the filter before completely removing it. Once all the oil drains out, clean the area and install the new filter. Make sure that the oil catch pan is not blocking the bolts.
It is always a good idea to run the engine for a few minutes to check if there are any leaks. After ensuring that there are no leaks, pour fresh oil into the engine using a funnel. Make sure to use the type and grade of oil recommended by the manufacturer. Check the oil level using the dipstick. Add more oil if necessary and dispose of the old oil properly.
Q1: How often should the oil filter be changed?
A1: Typically, the oil filter should be changed every 5,000 to 7,500 miles or with every engine oil change. However, this can vary based on driving conditions and the type of oil used.
Q2: Can one use the same oil filter for different Hyundai Atos models?
A2: No, the oil filter isn't interchangeable across different car models. Always check the oil filter's compatibility with the specific Hyundai Atos model.
Q3: What happens if the oil filter is not changed regularly?
A3: Failing to change the oil filter can lead to oil contamination, which may cause engine wear and tear. Over time, this can affect the engine's performance and may lead to costly repairs.
Q4: Is it necessary to use a branded oil filter?
A4: While it's not mandatory to use a branded oil filter, it's essential to choose one that meets industry standards. Aftermarket filters can be good, but ensure they come from reputable suppliers.
Q5: Can one change the oil filter themselves?
A5: Yes, changing the oil filter is a relatively straightforward task. Several online tutorials guide how to do it. However, ensure that the process is done correctly to avoid engine damage.
浙公网安备 33010002000092号
浙B2-20120091-4